:: General catalog ::

Internet+TV | Elite Banner Network

  • TELESCOPIC FILLING TERMINAL C-8O,100 /Filling eguipment/

Telescopic filling terminal CAT-80 (100) is intended for loading and metering of oil products, which are delivered into road tank car, of 0.55...60 mmz/sec viscosity, at loading facilities of oil depots at the ambient temperature from minus 40C to plus 50C. The terminal represents autonomous built-up welded structure located on the frame and allowing to load the road tank car with error of 0,25%. Pivotjoints mounted in the line of the terminal pipelines, allow to perform filling at inaccuracy of tank car position of 1700 mm in the radius of 3000 mm with the coverage of 360. Terminal CAT-80 (100) complies with TU U 29.1-24607422-003:2007. Average service life of telescopic filling terminal CAT-80 (100) is not less than eight years.

3.vertical bend
9.electric pump
Perfomance specification
Capacity, m3 /hour 45 (100)
Nominal internal diameter, mm 80 (100)
Viscosity of measured liquid, mm2/s 0.55-60
Type of metering indicator local Double-arrow with reset to 0
Supply voltage of electric assemblies, V 380
Current frequency, Hz 501
Distance from the base of the frame to axis of inlet fi tting, , mm 240 (252)
Overal l dimensions, mm See Figure
Weight, kg, max.650

laureate of competition 'Visha Proba' Private Joint-stock Company Scientific-Production Enterprise "NEFTEMASH" is the laureate of the All-Ukrainian competition "Visha Proba" in 2000 as manufacturer of equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises.

Enterprise "NEFTEMASH" was set up in 1993 and for today it is one of the largest producers and suppliers of technological equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises in Ukraine.

We have mastered a complete cycle of our products manufacturing which includes scientific developments, casting, machining, welding and assembly operations and commissioning tests.

All products are manufactured according to the valid GOSTs and newly developed and approved engineering specifications.

Annually, the design office offers scores of new products and is engaged in updating products which are in large-scale production bringing their quality to the European level, as well as is always in search of technologies focused on solving the problems with steam recovery and large-scale production of national filling pumps. New production base that is under construction now will be equipped with modern foreign and domestic equipment.

For today, full-scale production of the following items is under way:

  • Unit for top and bottom discharge-filling of tank tracks and railway cistern,
  • Pump units,
  • Discharge filters,
  • Service station point,
  • Tank-cap valves with control mechanisms,
  • Foam generators with foam chambers,
  • Measuring equipment,
  • Dip hatches and sky-lights,
  • Fire protecting units,
  • Check valves, inlet valves, breathing valves, and hydraulic safety valves,
  • Construction of service stations by customer's design.

High quality of manufactured items, realistic prices, flexible system of discounts, possible delivery, guarantees and spare parts.

Shop-Exhibition Center is operating on constant basis.

We have a successfully working wide network of representative offices in many regional centers of Ukraine and the CIS's capitals and in some foreign countries

Main | News | Products | Shops | Contacts | Guestbook