- SCREEN-TYPE FILTERS ÔÑ-80(100)-6-1Ò /Filters/
- SCREEN-TYPE FILTERS ÔÑ-80-6-2Ò, ÔÑÒÂ-80 /Filters/
| Screen-type filters in accord with TU U 29.2-24607422-018-2004 are intended for filtration of light oil products (gasoline, diesel fuel, kerosene) at AZS and oil depots from mechanical impurities of more than 0,3 mm in size.
Filters (Fig. 1 and Table 1) are mounted on suction pipeline of the pump. Place of
installation can be the well, open air etc. (as provided in the project), as based on free access thereto for technical servicing.
Filters can be made in accord with the customer drawings (see, for example, Fig.
2 and 3).
Filters shown in figures 4, 5, 6, 7 and in Table 2 are installed at AZS to perform
filtration of the product discharged from road tankers to storage tanks. For the same
purpose, filters of CDCTB-80 type are used (Fig. 8, 9).
Operating temperature of the filters: from -40°C to +50°C.
Design of filters and their dimensions are given in Figure 1 and in Table 1. Removable cover and filtering element allow performing the filter cleaning and replacement of damaged parts (mesh, frames etc.).
As a filtering element, stainless steel mesh is used. To remove water and mud, the plug is provided in the lower part of housing.|
|ÒàÜl. 1|| |
|Product ||ÔÑ-II-80-6-1Ò |
|Weight, kg, max. ||48,0/50,0/50,0 |
|Weight, kg, max.||52,0/48,0/53,0|
| || |
|ÒàÜl. 2|| |
|Version ||I, II|
|Nominal diameter, mm ||80|
|Í, mm||494/ 526|
|Weight, kg ||37,0|
|Version||III, IV |
|Nominal diameter, mm||80|
|Í, mm||612 / 581|
|Â, mm||350 / 450|
|Weight, kg||39,0 / 50,0|
Private Joint-stock Company Scientific-Production Enterprise "NEFTEMASH" is the laureate of the All-Ukrainian competition "Visha Proba" in 2000 as manufacturer of equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises.
Enterprise "NEFTEMASH" was set up in 1993 and for today it is one of the largest producers and suppliers of technological equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises in Ukraine.
We have mastered a complete cycle of our products manufacturing which includes scientific developments, casting, machining, welding and assembly operations and commissioning tests.
All products are manufactured according to the valid GOSTs and newly developed and approved engineering specifications.
Annually, the design office offers scores of new products and is engaged in updating products which are in large-scale production bringing their quality to the European level, as well as is always in search of technologies focused on solving the problems with steam recovery and large-scale production of national filling pumps. New production base that is under construction now will be equipped with modern foreign and domestic equipment.
For today, full-scale production of the following items is under way:
- Unit for top and bottom discharge-filling of tank tracks and railway cistern,
- Pump units,
- Discharge filters,
- Service station point,
- Tank-cap valves with control mechanisms,
- Foam generators with foam chambers,
- Measuring equipment,
- Dip hatches and sky-lights,
- Fire protecting units,
- Check valves, inlet valves, breathing valves, and hydraulic safety valves,
- Construction of service stations by customer's design.
High quality of manufactured items, realistic prices, flexible system of discounts, possible delivery, guarantees and spare parts.
Shop-Exhibition Center is operating on constant basis.
We have a successfully working wide network of representative offices in many regional centers of Ukraine and the CIS's capitals and in some foreign countries