:: General catalog ::

Internet+TV | Elite Banner Network

 
  • BOTTOM-FILL TERMINAL CAH-80, 100 /Filling eguipment/


Purpose
Bottom-fill terminal CAH-80 (100) is intended for loading light oil products of0,55. . .60 mmz/sec viscosity from the bottom into road tank cars at loading facilities of oil depots and measuring the amount of delivered oil product in units of volume at ambienttemperature from minus 40C to plus 50C. The terminal is made in the form of built-up welded structure located on the frame and allowing to load oil product with error of 0,25%. Pivot joints installed in the terminal line allow loading in zone of radii from 1,5 m to 2,8 m with the angle of coverage of25O degrees. It is possible to use the terminal for loading of other liquids not aggressive towards structural steels and oil-gasoline- resistant rubber. The terminal CAH-80 (100) complies with TU U 29.1-24607422-OO3:2005 and it is available in two versions (see Fig.1,2).



1.filter
2.electric pump
3.shutoff filter
4.meter
5.support branch pipe
6.movable branch pipe
7.movable branch pipe
8.pivot joints
9.cock
10.outlet coupling
Perfomance specification
Internal diameter, mm80; 100
Rated performance, m3/h45; 100
Conditional pressure, MPa (kg-force/cm2), at the most0.6 (6)
Ambient temperature, C-40 ... +50
Supply measurein volume units
Type of counter indicator local oneDouble-point zero-resetting indicator
Around-the-pintle main hinge rotation angle, at the least250

laureate of competition 'Visha Proba' Private Joint-stock Company Scientific-Production Enterprise "NEFTEMASH" is the laureate of the All-Ukrainian competition "Visha Proba" in 2000 as manufacturer of equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises.

Enterprise "NEFTEMASH" was set up in 1993 and for today it is one of the largest producers and suppliers of technological equipment for service stations, petroleum storage depots, petroleum and gas processing enterprises in Ukraine.

We have mastered a complete cycle of our products manufacturing which includes scientific developments, casting, machining, welding and assembly operations and commissioning tests.

All products are manufactured according to the valid GOSTs and newly developed and approved engineering specifications.

Annually, the design office offers scores of new products and is engaged in updating products which are in large-scale production bringing their quality to the European level, as well as is always in search of technologies focused on solving the problems with steam recovery and large-scale production of national filling pumps. New production base that is under construction now will be equipped with modern foreign and domestic equipment.

For today, full-scale production of the following items is under way:

  • Unit for top and bottom discharge-filling of tank tracks and railway cistern,
  • Pump units,
  • Discharge filters,
  • Service station point,
  • Tank-cap valves with control mechanisms,
  • Foam generators with foam chambers,
  • Measuring equipment,
  • Dip hatches and sky-lights,
  • Fire protecting units,
  • Check valves, inlet valves, breathing valves, and hydraulic safety valves,
  • Construction of service stations by customer's design.

High quality of manufactured items, realistic prices, flexible system of discounts, possible delivery, guarantees and spare parts.

Shop-Exhibition Center is operating on constant basis.

We have a successfully working wide network of representative offices in many regional centers of Ukraine and the CIS's capitals and in some foreign countries


Main | News | Products | Shops | Contacts | Guestbook